Description
Straight Shaft Axis Machined Turning Turbine Shafts
1, If The Two Ends Of The Shaft And The Screw Are Installed In a Fixed Way, The Polish With Thinner Diameter Can Be Selected. On The Contrary, If The Installation Methods Of The Two Ends Of The Shaft And The Screw Are Flexible, The Optical Axis With Thicker Diameter Can Be Selected.
2, The Lifting Device Has a Smaller Trajectory And Can Choose The Optical Axis With a Smaller Diameter. On The Contrary, In The Case Of a Larger Trajectory, It Is Necessary To Choose The Linear Optical Axis With a Larger Diameter. The Main Reason Is That The Long Travel Lifting Device Produces Greater Friction In The Operation Process, And The Friction Resistance Of Light Vehicles With Larger Diameter Is Better.
3, The Existence Of Load Center Of Gravity And Silk Center. If The Two Are Overlapping, The Optical Axis With Thinner Diameter Should Be Chosen. Of Course, If The Two Exist In a Parallel Way, The Smuggled Optical Axis Can Be Chosen.
4, The Screw Rod And The Bearing Should Be Kept Relatively Parallel, And The Parallelism Of Different Equipment Is Also Different. For Some Devices With Better Parallelism, We Can Choose The Linear Optical Axis With Smaller Diameter.
